Sawn Treated Tanalized Radiata Pine Timber

Cypress Sawmill stocks a range of tanalized pressure treated pine, in most common timber sizes. We have:

Treated Pine

H4 Ground Contact treated timber that is suitable for use as fence posts, retaining walls, garden edging etc. 100x100, 100x75, 150x50, 200x50, 100x25.

150x50 H4 retaining is available in a rustic type no 3 grade or a better no 2 grade, both are suitable for retaining walls depending on the effect required. Lengths are available up to 6.0 metre and have a sawn finish. Timber can be dfs (dressed on all four sides) on request.

We also have H3 treated timber for use above the ground. It is suitable for use inside or outside and is available in all the common timber sizes.

Untreated Pine

Cypress Sawmill can supply untreated pine timber and will cut to order to your requirements. Timber can also be cut to length through our optimizing docking saw ensuring the most usesable end product.

Timber is sold by the linear metre. We sell any quantity from one piece to packet loads. Come and select your own or contact us and we can deliver it to you.

Photos of Treated Pine Timber
H3 Treated Pine		200x50 Pine Timber		300x25 H3 Timber